If you want to help the environment while saving money on your power bills, you might want to learn about green energy technology. Green energy technology isn’t difficult or complicated to implement. Just do some research to learn what to do. Read on for some tips related to using green energy technology.
Use solar-powered lamps for outdoor lighting. They are inexpensive and don’t require electricity. This does more than just save energy. You will not have to hook up the lights to an electrical source.
Turn off the kitchen, bathroom, and any other exhaust fans as soon as you no longer need them. Some people leave the fans on for 20 minutes or so, but it is better to leave them on for no longer than five minutes after showering, bathing, or cooking is finished.
When building your home, pay attention to its orientation. An ideal home should be protected against overhead sun during the summer and be oriented so that it gets low-angle sun in the winter. This is a good way to save money on your heating bill and will keep your home cool in the summer.
Swap your old incandescent light bulbs for high-efficiency LED or compact fluorescent light bulbs. These bulbs use far less electricity than incandescent, and they come in sizes that fit most existing fixtures. While the up-front cost is generally higher, most of these bulbs will last for years before burning out.
A helpful tip to live greener and conserve energy is to have the windows in your home tinted. The windows in your home act like glass in a greenhouse and when you want you home to be cool, the windows will heat it up and work against your air conditioner and cost you a bundle.
Remember that solar panels, whether you install them on your roof or anywhere else on your property, must be angled toward the sun to receive maximum exposure. In the Northern Hemisphere, this means facing them south with an angle of latitude plus fifteen degrees. Otherwise, your investment will not return as much energy as you hope.
Put the solar energy system’s batteries close to its cells during installation. This makes sure power is not lost somewhere in the cable. Additionally, it avoids problems with shading and capacity reduction.
Are you still using oil heat? You could switch to a greener solution without replacing your furnace. Find a qualified technician to inspect your system and make sure you can switch to a biofuel. Biofuels are non-toxic, degradable and renewable sources of energy that you will be able to re-use.
If you are building a new home or are in the market for a new water heater, consider a tankless model. Even though these green versions of water heaters still use electricity or gas, they only need it to warm the water you’re using instead of heating it at all times. You can purchase a tankless heater for a faucet or your whole home.
Try sealing gaps underneath your doors and windows during the summer and winter. This can prevent the warm or cool air from outside from entering your home, which will help keep your home at a good temperature all year. You could also try putting in rugs to provide more insulation to your floorboards.
Replace regular light bulb with Energy Star qualified bulbs. These bulbs last about ten times as long as a traditional incandescent bulb, and use approximately 75 percent less energy, saving you about $30 in energy costs during the lifetime of the bulb. They also emit about 75 percent less heat, and are therefore much safer.
To help you increase your clean-energy consumption, try using wind energy. Wind is a very clean type of alternative energy, and it can help you cut your electricity bill a ton. If this solution interests you, check with your local authority to ensure you have proper zoning and also ensure you have sufficient space.
After reading this article, green energy technology should be less of a mystery to you. Use some of the tips you have just read, in order to help you begin using green energy technology. Soon, you’ll be on your way to using green energy technology to help you to create an environmentally-friendly home.